MAX4820EUP+T Maxim Integrated IC RELAY DRIVER 8CHAN 20-TSSOP
Integraallülitused (IC-d)
Tootja number:
MAX4820EUP+T
Tootja:
Tootekategooria:
Kirjeldus:
IC RELAY DRIVER 8CHAN 20-TSSOP
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
MAX4820EUP+T Andmetabelid(PDF)
Funktsioonid :
-
Liides :
SPI
Lüliti tüüp :
Relay, Solenoid Driver
Osa olek :
Active
Pakend/ümbris :
20-TSSOP (0.173", 4.40mm Width) Exposed Pad
Pakendamine :
Tape & Reel (TR)
Pinge – koormus :
2.3 V ~ 5.5 V
Pinge – toide (Vcc/Vdd) :
-
Praegune – väljund (maksimaalne) :
70mA
Rds sees (tüüp) :
2 Ohm
seeria :
-
Sisendtüüp :
-
Suhe – sisend:väljund :
1:8
Tarnija seadmepakett :
20-TSSOP-EP
Töötemperatuur :
-40°C ~ 85°C (TA)
Väljundi konfiguratsioon :
Low Side
Väljundi tüüp :
N-Channel
Väljundite arv :
8
Veakaitse :
-
Laos
24,292
Ühiku hind:
Võtke meiega ühendust Pakkumine
MAX4820EUP+T Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele MAX4820EUP+T konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc MAX4820EUP+T. Parima hinna saamiseks saidil MAX4820EUP+T võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
MAX4820EUP+T Iseärasused
MAX4820EUP+T is produced by Maxim Integrated, belongs to PMIC – toitejaotuslülitid, koormuse draiverid.
MAX4820EUP+T Toote üksikasjad
:
MAX4820EUP+T – PMIC – toitejaotuslülitid, koormuse draiverid disainitud puhvervõimendid ja toodetud Maxim Integrated.
MAX4820EUP+T, mida pakub Maxim Integrated, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC MAX4820EUP+T on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis MAX4820EUP+T (PDF), hind MAX4820EUP+T, Pinout MAX4820EUP+T, manuaal MAX4820EUP+T Ja MAX4820EUP+T asenduslahendus.
MAX4820EUP+T, mida pakub Maxim Integrated, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC MAX4820EUP+T on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis MAX4820EUP+T (PDF), hind MAX4820EUP+T, Pinout MAX4820EUP+T, manuaal MAX4820EUP+T Ja MAX4820EUP+T asenduslahendus.
MAX4820EUP+T FAQ
:
1. What is the maximum operating temperature of the MAX4820EUP+T?
The maximum operating temperature of the MAX4820EUP+T is +125°C.
2. What is the typical input offset voltage of the MAX4820EUP+T?
The typical input offset voltage of the MAX4820EUP+T is ±1mV.
3. What is the supply voltage range for the MAX4820EUP+T?
The supply voltage range for the MAX4820EUP+T is +2.7V to +5.5V.
4. What is the maximum output current of the MAX4820EUP+T?
The maximum output current of the MAX4820EUP+T is ±200mA.
5. What is the quiescent current of the MAX4820EUP+T in shutdown mode?
The quiescent current of the MAX4820EUP+T in shutdown mode is typically 0.1µA.
6. What is the bandwidth of the MAX4820EUP+T?
The bandwidth of the MAX4820EUP+T is typically 1.8MHz.
7. What is the total harmonic distortion (THD) of the MAX4820EUP+T at 1kHz?
The total harmonic distortion (THD) of the MAX4820EUP+T at 1kHz is typically -70dB.
8. What is the input bias current of the MAX4820EUP+T?
The input bias current of the MAX4820EUP+T is typically ±1pA.
9. What is the power supply rejection ratio (PSRR) of the MAX4820EUP+T at 100Hz?
The power supply rejection ratio (PSRR) of the MAX4820EUP+T at 100Hz is typically 90dB.
10. What is the package type of the MAX4820EUP+T?
The MAX4820EUP+T is available in a 20-pin TSSOP package.
The maximum operating temperature of the MAX4820EUP+T is +125°C.
2. What is the typical input offset voltage of the MAX4820EUP+T?
The typical input offset voltage of the MAX4820EUP+T is ±1mV.
3. What is the supply voltage range for the MAX4820EUP+T?
The supply voltage range for the MAX4820EUP+T is +2.7V to +5.5V.
4. What is the maximum output current of the MAX4820EUP+T?
The maximum output current of the MAX4820EUP+T is ±200mA.
5. What is the quiescent current of the MAX4820EUP+T in shutdown mode?
The quiescent current of the MAX4820EUP+T in shutdown mode is typically 0.1µA.
6. What is the bandwidth of the MAX4820EUP+T?
The bandwidth of the MAX4820EUP+T is typically 1.8MHz.
7. What is the total harmonic distortion (THD) of the MAX4820EUP+T at 1kHz?
The total harmonic distortion (THD) of the MAX4820EUP+T at 1kHz is typically -70dB.
8. What is the input bias current of the MAX4820EUP+T?
The input bias current of the MAX4820EUP+T is typically ±1pA.
9. What is the power supply rejection ratio (PSRR) of the MAX4820EUP+T at 100Hz?
The power supply rejection ratio (PSRR) of the MAX4820EUP+T at 100Hz is typically 90dB.
10. What is the package type of the MAX4820EUP+T?
The MAX4820EUP+T is available in a 20-pin TSSOP package.
MAX4820EUP+T Seotud märksõnad
:
MAX4820EUP+T Hind
MAX4820EUP+T Maalimine
MAX4820EUP+T Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "MAX4" seeria tooteid
