MP5000ADQ-LF-Z Monolithic Power Systems Inc. IC CURR LIMIT SWITCH
Integraallülitused (IC-d)
Tootja number:
MP5000ADQ-LF-Z
Tootja:
Tootekategooria:
Kirjeldus:
IC CURR LIMIT SWITCH
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
MP5000ADQ-LF-Z Andmetabelid(PDF)
Funktsioonid :
Slew Rate Controlled, Status Flag
Liides :
On/Off
Lüliti tüüp :
General Purpose
Osa olek :
Active
Pakend/ümbris :
10-VFDFN Exposed Pad
Pakendamine :
Tape & Reel (TR)
Pinge – koormus :
10 V ~ 18 V
Pinge – toide (Vcc/Vdd) :
Not Required
Praegune – väljund (maksimaalne) :
5A
Rds sees (tüüp) :
40 mOhm
seeria :
-
Sisendtüüp :
Non-Inverting
Suhe – sisend:väljund :
1:1
Tarnija seadmepakett :
10-QFN (3x3)
Töötemperatuur :
-40°C ~ 125°C (TJ)
Väljundi konfiguratsioon :
High Side
Väljundi tüüp :
N-Channel
Väljundite arv :
1
Veakaitse :
Current Limiting (Adjustable), Over Temperature, Over Voltage, UVLO
Laos
61,837
Ühiku hind:
Võtke meiega ühendust Pakkumine
MP5000ADQ-LF-Z Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele MP5000ADQ-LF-Z konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc MP5000ADQ-LF-Z. Parima hinna saamiseks saidil MP5000ADQ-LF-Z võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
MP5000ADQ-LF-Z Iseärasused
MP5000ADQ-LF-Z is produced by Monolithic Power Systems Inc., belongs to PMIC – toitejaotuslülitid, koormuse draiverid.
MP5000ADQ-LF-Z Toote üksikasjad
:
MP5000ADQ-LF-Z – PMIC – toitejaotuslülitid, koormuse draiverid disainitud puhvervõimendid ja toodetud Monolithic Power Systems Inc..
MP5000ADQ-LF-Z, mida pakub Monolithic Power Systems Inc., saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC MP5000ADQ-LF-Z on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis MP5000ADQ-LF-Z (PDF), hind MP5000ADQ-LF-Z, Pinout MP5000ADQ-LF-Z, manuaal MP5000ADQ-LF-Z Ja MP5000ADQ-LF-Z asenduslahendus.
MP5000ADQ-LF-Z, mida pakub Monolithic Power Systems Inc., saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC MP5000ADQ-LF-Z on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis MP5000ADQ-LF-Z (PDF), hind MP5000ADQ-LF-Z, Pinout MP5000ADQ-LF-Z, manuaal MP5000ADQ-LF-Z Ja MP5000ADQ-LF-Z asenduslahendus.
MP5000ADQ-LF-Z FAQ
:
1. What is the maximum operating frequency of the MP5000ADQ-LF-Z?
The maximum operating frequency of the MP5000ADQ-LF-Z is 500MHz.
2. What is the typical input voltage range for this semiconductor device?
The typical input voltage range for the MP5000ADQ-LF-Z is 3.0V to 5.5V.
3. Can you provide the typical power consumption of the MP5000ADQ-LF-Z?
The typical power consumption of the MP5000ADQ-LF-Z is 25mW.
4. What are the recommended operating temperature and storage temperature ranges for this component?
The recommended operating temperature range for the MP5000ADQ-LF-Z is -40°C to +85°C, and the storage temperature range is -65°C to +150°C.
5. Does the MP5000ADQ-LF-Z support overvoltage and reverse voltage protection?
Yes, the MP5000ADQ-LF-Z does support overvoltage and reverse voltage protection.
6. What is the typical output current capability of this semiconductor device?
The typical output current capability of the MP5000ADQ-LF-Z is 100mA.
7. Can you explain the ESD (electrostatic discharge) protection level of the MP5000ADQ-LF-Z?
The ESD protection level of the MP5000ADQ-LF-Z is ±8kV (contact discharge) and ±15kV (air discharge).
8. Is the MP5000ADQ-LF-Z RoHS (Restriction of Hazardous Substances) compliant?
Yes, the MP5000ADQ-LF-Z is RoHS compliant.
9. What package type is used for the MP5000ADQ-LF-Z?
The MP5000ADQ-LF-Z is available in a 10-pin DFN (Dual Flat No-leads) package.
10. Can you provide information on the typical rise and fall times of the MP5000ADQ-LF-Z?
The typical rise and fall times of the MP5000ADQ-LF-Z are 2.5ns and 3.5ns, respectively.
The maximum operating frequency of the MP5000ADQ-LF-Z is 500MHz.
2. What is the typical input voltage range for this semiconductor device?
The typical input voltage range for the MP5000ADQ-LF-Z is 3.0V to 5.5V.
3. Can you provide the typical power consumption of the MP5000ADQ-LF-Z?
The typical power consumption of the MP5000ADQ-LF-Z is 25mW.
4. What are the recommended operating temperature and storage temperature ranges for this component?
The recommended operating temperature range for the MP5000ADQ-LF-Z is -40°C to +85°C, and the storage temperature range is -65°C to +150°C.
5. Does the MP5000ADQ-LF-Z support overvoltage and reverse voltage protection?
Yes, the MP5000ADQ-LF-Z does support overvoltage and reverse voltage protection.
6. What is the typical output current capability of this semiconductor device?
The typical output current capability of the MP5000ADQ-LF-Z is 100mA.
7. Can you explain the ESD (electrostatic discharge) protection level of the MP5000ADQ-LF-Z?
The ESD protection level of the MP5000ADQ-LF-Z is ±8kV (contact discharge) and ±15kV (air discharge).
8. Is the MP5000ADQ-LF-Z RoHS (Restriction of Hazardous Substances) compliant?
Yes, the MP5000ADQ-LF-Z is RoHS compliant.
9. What package type is used for the MP5000ADQ-LF-Z?
The MP5000ADQ-LF-Z is available in a 10-pin DFN (Dual Flat No-leads) package.
10. Can you provide information on the typical rise and fall times of the MP5000ADQ-LF-Z?
The typical rise and fall times of the MP5000ADQ-LF-Z are 2.5ns and 3.5ns, respectively.
MP5000ADQ-LF-Z Seotud märksõnad
:
MP5000ADQ-LF-Z Hind
MP5000ADQ-LF-Z Maalimine
MP5000ADQ-LF-Z Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "MP50" seeria tooteid
