74HCT595N,112 NXP USA Inc. IC SHIFT REGISTER 8BIT 16DIP
Integraallülitused (IC-d)
Tootja number:
74HCT595N,112
Tootja:
Tootekategooria:
Kirjeldus:
IC SHIFT REGISTER 8BIT 16DIP
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
74HCT595N,112 Andmetabelid(PDF)
Elementide arv :
1
Funktsioon :
Serial to Parallel, Serial
Loogika tüüp :
Shift Register
Osa olek :
Obsolete
Paigaldustüüp :
Through Hole
Pakend/ümbris :
16-DIP (0.300", 7.62mm)
Pakendamine :
Tube
Pinge – toide :
4.5 V ~ 5.5 V
seeria :
74HCT
Tarnija seadmepakett :
16-DIP
Töötemperatuur :
-40°C ~ 125°C
Väljundi tüüp :
Tri-State
Bittide arv elemendi kohta :
8
Laos
24,764
Ühiku hind:
Võtke meiega ühendust Pakkumine
74HCT595N,112 Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele 74HCT595N,112 konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc 74HCT595N,112. Parima hinna saamiseks saidil 74HCT595N,112 võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
74HCT595N,112 Iseärasused
74HCT595N,112 is produced by NXP USA Inc., belongs to Loogika – nihkeregistrid.
74HCT595N,112 Toote üksikasjad
:
74HCT595N,112 – Loogika – nihkeregistrid disainitud puhvervõimendid ja toodetud NXP USA Inc..
74HCT595N,112, mida pakub NXP USA Inc., saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC 74HCT595N,112 on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis 74HCT595N,112 (PDF), hind 74HCT595N,112, Pinout 74HCT595N,112, manuaal 74HCT595N,112 Ja 74HCT595N,112 asenduslahendus.
74HCT595N,112, mida pakub NXP USA Inc., saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC 74HCT595N,112 on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis 74HCT595N,112 (PDF), hind 74HCT595N,112, Pinout 74HCT595N,112, manuaal 74HCT595N,112 Ja 74HCT595N,112 asenduslahendus.
74HCT595N,112 FAQ
:
1. What is the function of the 74HCT595N,112 semiconductor?
The 74HCT595N,112 is an 8-bit serial-in/parallel-out shift register with output latches. It is commonly used to expand the number of output pins available on a microcontroller.
2. What are the key features of the 74HCT595N,112 semiconductor?
The 74HCT595N,112 features an 8-bit serial input, serial output, and parallel output. It also has a wide operating voltage range and high-speed operation.
3. How does the 74HCT595N,112 differ from similar semiconductor components?
Compared to similar components, the 74HCT595N,112 offers higher speed and lower power consumption, making it suitable for applications requiring efficient data transfer.
4. What are the typical applications of the 74HCT595N,112 semiconductor?
The 74HCT595N,112 is commonly used in applications such as LED displays, driving multiple LEDs, and controlling multiple digital outputs.
5. What are the voltage and current specifications for the 74HCT595N,112 semiconductor?
The 74HCT595N,112 operates within a voltage range of 2V to 6V and can handle a maximum output current of 35mA per channel.
6. How can the 74HCT595N,112 be cascaded to increase the number of output channels?
Multiple 74HCT595N,112 chips can be cascaded by connecting the serial output of one chip to the serial input of the next, allowing for expansion of output channels.
7. What are the recommended PCB layout guidelines for the 74HCT595N,112?
To ensure proper performance, it is recommended to minimize trace lengths, provide adequate decoupling capacitors, and follow the manufacturer's layout recommendations.
8. What precautions should be taken when handling and soldering the 74HCT595N,112?
When handling and soldering the 74HCT595N,112, it is important to avoid electrostatic discharge (ESD) and adhere to the recommended soldering temperature and duration.
9. How can the 74HCT595N,112 be interfaced with a microcontroller?
The 74HCT595N,112 can be interfaced with a microcontroller using its serial input, clock, and latch enable pins, allowing for easy integration into digital systems.
10. Are there any common failure modes or issues associated with the 74HCT595N,112?
Common issues with the 74HCT595N,112 include improper clocking, inadequate power supply decoupling, and exceeding the maximum voltage or current ratings, which can lead to erratic behavior or damage to the device.
The 74HCT595N,112 is an 8-bit serial-in/parallel-out shift register with output latches. It is commonly used to expand the number of output pins available on a microcontroller.
2. What are the key features of the 74HCT595N,112 semiconductor?
The 74HCT595N,112 features an 8-bit serial input, serial output, and parallel output. It also has a wide operating voltage range and high-speed operation.
3. How does the 74HCT595N,112 differ from similar semiconductor components?
Compared to similar components, the 74HCT595N,112 offers higher speed and lower power consumption, making it suitable for applications requiring efficient data transfer.
4. What are the typical applications of the 74HCT595N,112 semiconductor?
The 74HCT595N,112 is commonly used in applications such as LED displays, driving multiple LEDs, and controlling multiple digital outputs.
5. What are the voltage and current specifications for the 74HCT595N,112 semiconductor?
The 74HCT595N,112 operates within a voltage range of 2V to 6V and can handle a maximum output current of 35mA per channel.
6. How can the 74HCT595N,112 be cascaded to increase the number of output channels?
Multiple 74HCT595N,112 chips can be cascaded by connecting the serial output of one chip to the serial input of the next, allowing for expansion of output channels.
7. What are the recommended PCB layout guidelines for the 74HCT595N,112?
To ensure proper performance, it is recommended to minimize trace lengths, provide adequate decoupling capacitors, and follow the manufacturer's layout recommendations.
8. What precautions should be taken when handling and soldering the 74HCT595N,112?
When handling and soldering the 74HCT595N,112, it is important to avoid electrostatic discharge (ESD) and adhere to the recommended soldering temperature and duration.
9. How can the 74HCT595N,112 be interfaced with a microcontroller?
The 74HCT595N,112 can be interfaced with a microcontroller using its serial input, clock, and latch enable pins, allowing for easy integration into digital systems.
10. Are there any common failure modes or issues associated with the 74HCT595N,112?
Common issues with the 74HCT595N,112 include improper clocking, inadequate power supply decoupling, and exceeding the maximum voltage or current ratings, which can lead to erratic behavior or damage to the device.
74HCT595N,112 Seotud märksõnad
:
74HCT595N,112 Hind
74HCT595N,112 Maalimine
74HCT595N,112 Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "74HC" seeria tooteid
