SN74LS423NG4 Texas Instruments IC DUAL MONO MULTIVIBE 16-DIP
Integraallülitused (IC-d)
Tootja number:
SN74LS423NG4
Tootja:
Tootekategooria:
Kirjeldus:
IC DUAL MONO MULTIVIBE 16-DIP
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
SN74LS423NG4 Andmetabelid(PDF)
Loogika tüüp :
Monostable
Osa olek :
Active
Paigaldustüüp :
Through Hole
Pakend/ümbris :
16-DIP (0.300", 7.62mm)
Pakendamine :
Tube
Paljundamise viivitus :
28ns
Pinge – toide :
4.75V ~ 5.25V
Schmitti päästiku sisend :
No
seeria :
74LS
Sõltumatud vooluringid :
2
Tarnija seadmepakett :
16-PDIP
Töötemperatuur :
0°C ~ 70°C
Vool – väljund kõrge, madal :
400µA, 8mA
Laos
38,081
Ühiku hind:
Võtke meiega ühendust Pakkumine
SN74LS423NG4 Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele SN74LS423NG4 konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc SN74LS423NG4. Parima hinna saamiseks saidil SN74LS423NG4 võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
SN74LS423NG4 Iseärasused
SN74LS423NG4 is produced by Texas Instruments, belongs to Loogika – multivibraatorid.
SN74LS423NG4 Toote üksikasjad
:
SN74LS423NG4 – Loogika – multivibraatorid disainitud puhvervõimendid ja toodetud Texas Instruments.
SN74LS423NG4, mida pakub Texas Instruments, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC SN74LS423NG4 on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis SN74LS423NG4 (PDF), hind SN74LS423NG4, Pinout SN74LS423NG4, manuaal SN74LS423NG4 Ja SN74LS423NG4 asenduslahendus.
SN74LS423NG4, mida pakub Texas Instruments, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC SN74LS423NG4 on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis SN74LS423NG4 (PDF), hind SN74LS423NG4, Pinout SN74LS423NG4, manuaal SN74LS423NG4 Ja SN74LS423NG4 asenduslahendus.
SN74LS423NG4 FAQ
:
1. What is the function of the SN74LS423NG4 semiconductor?
The SN74LS423NG4 is a dual retriggerable monostable multivibrator designed to generate accurate time delays and pulses. It features two independent, retriggerable, monostable multivibrators with output pulse width control by three methods: external timing components, voltage, or current.
2. What are the key features of the SN74LS423NG4 semiconductor?
Key features of the SN74LS423NG4 include wide supply voltage range, low power consumption, and high noise immunity. It also offers retriggerable or non-retriggerable operation, and can be used as an astable multivibrator.
3. What is the maximum operating frequency of the SN74LS423NG4?
The maximum operating frequency of the SN74LS423NG4 is typically 33 MHz.
4. What is the recommended operating temperature range for the SN74LS423NG4?
The recommended operating temperature range for the SN74LS423NG4 is -40°C to 85°C.
5. What are the typical applications of the SN74LS423NG4 semiconductor?
Typical applications of the SN74LS423NG4 include precision timing, pulse generation, and delay circuits in various electronic systems.
6. What is the pin configuration of the SN74LS423NG4?
The SN74LS423NG4 is a 16-pin DIP (dual in-line package) semiconductor with specific pin configurations for input, output, and control signals. Refer to the datasheet for detailed pinout information.
7. What are the recommended power supply and ground connections for the SN74LS423NG4?
It is recommended to connect the VCC pin to the positive power supply and the GND pin to the ground in accordance with the specified voltage levels.
8. How does the SN74LS423NG4 handle retriggering and triggering inputs?
The SN74LS423NG4 features retriggerable and non-retriggerable modes, allowing flexibility in handling retriggering and triggering inputs based on the application requirements.
9. What are the typical voltage and current requirements for the SN74LS423NG4?
The typical voltage and current requirements for the SN74LS423NG4 depend on the specific operating conditions and should be carefully considered during circuit design and implementation.
10. Are there any known reliability issues or failure modes associated with the SN74LS423NG4?
Reliability issues and failure modes for the SN74LS423NG4 are typically related to improper handling, exceeding absolute maximum ratings, or inadequate environmental conditions. Adhering to recommended operating conditions and proper ESD precautions can help mitigate these risks.
The SN74LS423NG4 is a dual retriggerable monostable multivibrator designed to generate accurate time delays and pulses. It features two independent, retriggerable, monostable multivibrators with output pulse width control by three methods: external timing components, voltage, or current.
2. What are the key features of the SN74LS423NG4 semiconductor?
Key features of the SN74LS423NG4 include wide supply voltage range, low power consumption, and high noise immunity. It also offers retriggerable or non-retriggerable operation, and can be used as an astable multivibrator.
3. What is the maximum operating frequency of the SN74LS423NG4?
The maximum operating frequency of the SN74LS423NG4 is typically 33 MHz.
4. What is the recommended operating temperature range for the SN74LS423NG4?
The recommended operating temperature range for the SN74LS423NG4 is -40°C to 85°C.
5. What are the typical applications of the SN74LS423NG4 semiconductor?
Typical applications of the SN74LS423NG4 include precision timing, pulse generation, and delay circuits in various electronic systems.
6. What is the pin configuration of the SN74LS423NG4?
The SN74LS423NG4 is a 16-pin DIP (dual in-line package) semiconductor with specific pin configurations for input, output, and control signals. Refer to the datasheet for detailed pinout information.
7. What are the recommended power supply and ground connections for the SN74LS423NG4?
It is recommended to connect the VCC pin to the positive power supply and the GND pin to the ground in accordance with the specified voltage levels.
8. How does the SN74LS423NG4 handle retriggering and triggering inputs?
The SN74LS423NG4 features retriggerable and non-retriggerable modes, allowing flexibility in handling retriggering and triggering inputs based on the application requirements.
9. What are the typical voltage and current requirements for the SN74LS423NG4?
The typical voltage and current requirements for the SN74LS423NG4 depend on the specific operating conditions and should be carefully considered during circuit design and implementation.
10. Are there any known reliability issues or failure modes associated with the SN74LS423NG4?
Reliability issues and failure modes for the SN74LS423NG4 are typically related to improper handling, exceeding absolute maximum ratings, or inadequate environmental conditions. Adhering to recommended operating conditions and proper ESD precautions can help mitigate these risks.
SN74LS423NG4 Seotud märksõnad
:
SN74LS423NG4 Hind
SN74LS423NG4 Maalimine
SN74LS423NG4 Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "SN74" seeria tooteid
