L298N STMicroelectronics IC BRIDGE DRIVER PAR 15MULTIWATT
Integraallülitused (IC-d)
Tootja number:
L298N
Tootja:
Tootekategooria:
Kirjeldus:
IC BRIDGE DRIVER PAR 15MULTIWATT
RoHs olek:
Pliivaba / RoHS-iga ühilduv Andmetabelid:
L298N Andmetabelid(PDF)
Funktsioonid :
-
Koormuse tüüp :
Inductive
Liides :
Logic
Osa olek :
Active
Paigaldustüüp :
Through Hole
Pakend/ümbris :
Multiwatt-15 (Vertical, Bent and Staggered Leads)
Pakendamine :
Tube
Pinge – koormus :
4.8 V ~ 46 V
Pinge – toide :
4.5 V ~ 7 V
Praegune – tippväljund :
2A
Praegune – väljund / kanal :
-
Rakendused :
DC Motors, Relays, Solenoids, Stepper Motors
Rds sees (tüüp) :
-
seeria :
-
Tarnija seadmepakett :
15-Multiwatt
Tehnoloogia :
Bipolar
Töötemperatuur :
-40°C ~ 150°C (TJ)
Väljundi konfiguratsioon :
Half Bridge (4)
Veakaitse :
Current Limiting, Over Temperature
Laos
34,622
Ühiku hind:
Võtke meiega ühendust Pakkumine
L298N Konkurentsivõimelised hinnad
ChipIcil on ainulaadne tarneallikas. Pakume oma klientidele L298N konkurentsivõimelise hinnaga. Saate nautida meie parimat teenust, ostes ChipIc L298N. Parima hinna saamiseks saidil L298N võtke meiega ühendust.
Hinnapakkumise saamiseks klõpsake
L298N Iseärasused
L298N is produced by STMicroelectronics, belongs to PMIC – täis, poolsilla draiverid.
L298N Toote üksikasjad
:
L298N – PMIC – täis, poolsilla draiverid disainitud puhvervõimendid ja toodetud STMicroelectronics.
L298N, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC L298N on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis L298N (PDF), hind L298N, Pinout L298N, manuaal L298N Ja L298N asenduslahendus.
L298N, mida pakub STMicroelectronics, saab osta CHIPMLCC-st.
Siit leiate erinevaid juhtivate tootjate elektroonilisi osi rahu.
CHIPMLCC L298N on range kvaliteedikontrolliga ja nõuetele vastav kõike nõuetele.
CHIPMLCC-s näidatud fondi staatus on ainult viitamiseks.
Kui te ei leia otsitavat osa, võtke meiega ühendust lisateavet, näiteks varude arvu andmetabelis L298N (PDF), hind L298N, Pinout L298N, manuaal L298N Ja L298N asenduslahendus.
L298N FAQ
:
1. What is the maximum voltage and current rating for the L298N motor driver?
The L298N motor driver has a maximum voltage rating of 46V and a continuous current rating of 2A per channel.
2. Can the L298N handle bi-directional DC motors?
Yes, the L298N is capable of controlling bi-directional DC motors by using its H-bridge configuration.
3. How can I connect the L298N to an Arduino or other microcontroller?
You can connect the L298N to your microcontroller by using digital output pins to control the direction and speed of the connected motors.
4. What are the typical applications for the L298N motor driver?
The L298N motor driver is commonly used in robotics, automation, and other projects requiring motor control.
5. Does the L298N require heat sinks for operation?
Yes, especially when operating at higher currents, it is recommended to use heat sinks to dissipate heat from the L298N.
6. Can the L298N drive stepper motors?
Yes, the L298N can be used to drive bipolar stepper motors by properly controlling the coil sequences.
7. What is the purpose of the freewheeling diodes on the L298N module?
The freewheeling diodes protect the L298N from voltage spikes generated by the inductive loads such as motors.
8. Is it possible to parallel two L298N modules for higher current capability?
Yes, you can parallel two L298N modules to increase the current handling capacity for driving motors.
9. How do I troubleshoot overheating issues with the L298N?
Check for any short circuits, ensure proper heat sinking, and reduce the load if the L298N is overheating during operation.
10. Can the L298N be used to control different types of motors, such as brushed and brushless DC motors?
The L298N is designed to control brushed DC motors, but it is not suitable for brushless DC motors without additional circuitry.
The L298N motor driver has a maximum voltage rating of 46V and a continuous current rating of 2A per channel.
2. Can the L298N handle bi-directional DC motors?
Yes, the L298N is capable of controlling bi-directional DC motors by using its H-bridge configuration.
3. How can I connect the L298N to an Arduino or other microcontroller?
You can connect the L298N to your microcontroller by using digital output pins to control the direction and speed of the connected motors.
4. What are the typical applications for the L298N motor driver?
The L298N motor driver is commonly used in robotics, automation, and other projects requiring motor control.
5. Does the L298N require heat sinks for operation?
Yes, especially when operating at higher currents, it is recommended to use heat sinks to dissipate heat from the L298N.
6. Can the L298N drive stepper motors?
Yes, the L298N can be used to drive bipolar stepper motors by properly controlling the coil sequences.
7. What is the purpose of the freewheeling diodes on the L298N module?
The freewheeling diodes protect the L298N from voltage spikes generated by the inductive loads such as motors.
8. Is it possible to parallel two L298N modules for higher current capability?
Yes, you can parallel two L298N modules to increase the current handling capacity for driving motors.
9. How do I troubleshoot overheating issues with the L298N?
Check for any short circuits, ensure proper heat sinking, and reduce the load if the L298N is overheating during operation.
10. Can the L298N be used to control different types of motors, such as brushed and brushless DC motors?
The L298N is designed to control brushed DC motors, but it is not suitable for brushless DC motors without additional circuitry.
L298N Seotud märksõnad
:
L298N Hind
L298N Maalimine
L298N Tihvtide pinge
Pakkumised: Kiire hinnapakkumise kontroll
Minimaalne tellimus: 1
Sisaldab "L298" seeria tooteid
